3240 mkpuchi mkpuchi Epoxy Laminate

Nkọwa dị mkpirikpi:

Epoxy osisi nke ngwaahịa a: akwa eriri iko na-ejikọta ya na resin epoxy ma mee ya site na kpo oku na ịpị.Ihe nlereanya ahụ bụ 3240. Ọ nwere ihe ndị na-arụ ọrụ dị elu na okpomọkụ na-ekpo ọkụ na ọkụ eletrik kwụsiri ike na okpomọkụ dị elu.Ọ dabara maka akụkụ ihe nrụpụta dị elu maka igwe, ngwa eletriki na ngwa elektrọnik, nke nwere nnukwu igwe na akụrụngwa dielectric, ezigbo nguzogide okpomọkụ na mgbochi mmiri.Klas na-eguzogide okpomọkụ E (125 degrees).

Ọkpụrụkpụ mgbe: 0.5 ~ 100mm
Nha mgbe niile: 1020×2040mm
Ọ na-ekpo ọkụ na deformed na a elu okpomọkụ nke 180 ℃, n'ozuzu adịghị kpụ ọkụ n'ọnụ na ndị ọzọ ọla, nke nwere ike ime ka deformation nke metal mpempe akwụkwọ.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Atụmatụ ngwa

1. Ụdị dị iche iche.
2. Ọ dị mfe ịgwọ ọrịa.

3. Ike adhesion.
4. Ụdị dị iche iche.

Nkọwa ngwaahịa

Mba.	ALA	UNIT	Uru ọkọlọtọ
1	Ike mgbanwe na-adaba na laminations A: N'okpurunkịtịọnọdụ E-1/150: N'okpuru 150±5℃	MPa	≥ 340
2	Notch Mmetụta ike yiri lamination(chara acha)	kJ/m²	≥33
3	Mkpuchi mkpuchi mgbe imikpu n'ime mmiri (D-24/23)	Ω	≥5.0X10⁸
4	Ike dielectric perpendicular na lamination(na mmanụ 90 ± 2 ℃)1.0mm na ọkpụrụkpụ	MV/m	≥14.2
5	Mbelata voltaji parallel kalamination (na mmanụ 90 ± 2 ℃)	kV	≥35
6	Ikikere (48-62Hz)	-	≤5.5
7	Ikikere(1MHz)	-	≤5.5
8	Ihe nkwụsị (48-62Hz)		≤0.04
9	Ụlọ ọrụ mgbasa (1MHz)		≤0.04
10	Ntinye mmiriD24/23, 1.6mm na ọkpụrụkpụ	mg	≤19
11	Njupụta	g/cm³	1.70-1.90
12	Ịkụ ọkụ	Klas	-
13	Agba		eke